![]() Simply push the top of the trigger to rotate the flexible shaft in a clockwise direction and enter the tube. When using the speed-feed feature, shaft feed is totally controlled by the gun. While the operator or unit feeds the rotating shaft assembly through the tube, the waterflow flushes out deposits as they are loosened. ![]() A gun or foot switch controls shaft rotation and waterflow. As the shaft rotates inside a watertight nylon casing, the unit feeds water through the casing to the cleaning tool. The RAM-5SF uses a cleaning tool mounted to the tip of a flexible shaft, which is available in different lengths and diameters to fit the size of the tube to be cleaned. The shaft is power fed by the unit through the control gun, eliminating fatigue caused by manual feeding operations and increasing operator productivity. With the speed-feed gun, maintenance personnel will no longer have to hand feed the flexible shaft into and out of the tubes. Quick By power feeding the flexible shaft through the tubes, Goodway’s revolutionary speed-feed system reduces tube cleaning time by as much as 75% over other cleaning methods.Other flexible shafts and accessories are available for use without the speed-feed gun for removing a variety of deposits in straight and curved tubes/pipes 1/4"-1" (6.4-25.4mm) I.D. Flexible shafts and Goodway Blue Nylon Brushes are available for use with the speed-feed gun for removing soft deposits in straight tubes/pipes 9/16"-1" (14.3-25.4mm) I.D. As the brush travels the length of the tube, water simultaneously flushes out loosened deposits, leaving the tube thoroughly cleaned. As a Goodway Blue Nylon Brush is rotated through a tube at the tip of a flexible shaft, the shaft is power fed by the unit into and out of the tube at 3' (0.9m) per second. It will clean tubes up to four times faster than any other rotary tube cleaner. It is the machine of choice among contractors and managers of large buildings and facilities. The patented RAM-5SF Speed-Feed Tube Cleaner makes tube cleaning quick and easy with its revolutionary speed-feed gun. Foot switch or gun for operator convenience to activate shaft rotation and waterflow – reduced water consumption and cleaner working area.Simultaneous water flush to remove deposits from tubes – saves time.Large wheels – easy maneuverability up and down stairs.Quick disconnect of flexible shaft – no tools required.Interchangeability of different size flexible shafts and cleaning tools – maximum versatility.Stainless steel cover and corrosion resistant chassis – long life.Speed-feed system power feeds flexible shaft into and out of tubes at 3' (0.9m) per second – reduced labor and increased productivity.While the design of the brush and the spiral in the tube causes the brush to be self propelled through the tube, the variable speed of the RAM-6 allows you to set the brush rotation speed to match the natural feed rate of the spiral in your tube, preventing slip and allowing the brush to thoroughly clean both, the lands and the grooves of the tube. The two-direction foot switch permits forward rotation for entering the tubes and reverse rotation for exiting. The RAM-6 is equipped with a reversible motor for cleaning internally enhanced tubes.
0 Comments
Leave a Reply. |